Putken lävistys venttiili CASTEL 8330/A- 1/4MSAE- 6...10MM

Castel 8330 Line piercing valve

Designed for installation on commercial refrigerating
systems and on civil and industrial conditioning plants,
which use the following refrigerant fluids:

R22, R134a, R404A, R407C, R410A; R507

The piercing valve is a fast and cheap means of providing
a loading, outlet or inlet point in the refrigerating system.

It can be applied on copper tube with a 6 mm to 10 mm
diameter, and can be installed in any position on the
system.

COSTRUCTION

The main parts of the piercing valve are made with the
following materials:
- Hot forged brass EN 12420 – CW 617N for body
- Hardened steel for the needle
- Chloroprene rubber (CR) for the outlet seal gaskets

INSTALLATION

The threaded fork must be installed astride of the copper
tube, the valve is fastened to the pipe by tightening the
lower nut and screwing it the needle pierces the pipe. The
hole, pierced by the needle, connects the pipe inlet with
the SAE-Flare connection as shown in figures 1 and 2.