EXPANSION MODULE WITH 7 RELAY OUTPUTS
D: 4 DIN Rail
 
Generals
Display: no display
Power supply: 12, 24Vac/dc
 
Probe inputs
NTC/PTC: 5 configurable
NTC/PTC/4-20mA/0-5V: 3 configurable
 
Digital inputs
Free voltage: 9 configurable
 
Relay outputs
5A: 7 configurable
 
Other outputs
Analogs:     2xPWM, 0-10V, 4-20mA
                 1x0-10V, 4-20mA
LAN: present
TTL/Hot Key 64/Prog Tool Kit: present
 
Other
Connection kit:DWDE30-KIT

IC200 evo SERIES: 2 CIRCUIT up to 6 COMPRESSOR UNIT

CONTROLLERS with EEV MANAGEMENT

IC200 evo is the iCHILL evolution series of controllers, dedicated to the chiller and heat pump units. Compactness, extreme
flexibility, driver control for the electronic expansion valves, and advanced functions such as free cooling and sanitary hot water
production are only some of the main elements that make the series complete and suitable for the majority of plants. Controlled
units can be single or dual circuit up to 6 compressors such as: air/air, air/water, water/water, motor-condensing,
geothermal heat pumps and dryers.

TECHNICAL DATA

Housing self extinguishing ABS

Format

CX: frontal 32x74mm; depth 59,5mm

D: frontal 110x70mm; depth 59,5mm

Display models with display: 4 digits red LED + 4 digits yellow LED + icons

Mounting

CX: panel mounting in a 29x71mm cut-out

D: DIN Rail or wall mounting through integrated brackets

Front protection

CX: IP65

Connections disconnectable connectors
Power supply 12Vac/dc -10% - +15%, 24Vac/dc ±10% 50/60Hz
Power absorption 10VA max

Relay outputs

SPDT 5(2)A, 250Vac

Analog output

CX: 2xPWM/0-10V
CX: 2x0-10V
D: 2xPWM/0-10V/4-20mA
D: 1x0-10V/4-20mA

Data storing non-volatile memory (EEPROM)
Operating temperature -10-55°C (14-131°F)
Storage temperature -30-85°C (-22-185°F)
Relative humidity 20-85% (non condensing)

Measuring and regulation range

pressure probe: 0-50bar (0-725PSI)
NTC probe: -50-110°C (-58-230°F)
PTC probe: -50-150°C (-58-302°F)

Resolution 0,1°C or 1°F or 0,1bar or 1PSI
Accuracy (at ambient temperature) ± 0.7°C ± 1 digit

• Management of scroll, screw and inverter compressors
• Compressor rotation control (also from start/hour number)
• Data logger (alarm type, date, hours, machine status)
• Pump-down function (stop and start)
• Capacity function of machine power during critical functioning conditions such as high or low condensing pressure
• Forced defrost during critical conditions
• Combined defrost temperature/pressure
• Sanitary hot water production
• Solar panel management
• Dynamic set point
• Start and stop by time bands
• Second set point (by time bands or digital input)
• PWM/4÷20mA/0÷10V output for condensing control
• Easy programming through HOT KEY or PC (WIZMATE PROG TOOL KIT)
• RS485 and/or TTL (convertible in RS485) serial output with ModBUS protocol
• Quick tab connectors on all models
• LAN output for I/O expansion modules or EEV driver connection